The Schwarzwälder watchmaker Hanhart 1882 GmbH has developed a limited special edition in cooperation with forum members of the "Watchlounge". On Saturday, April 1, 2017 in Gütenbach, at Hanhart's headquarters, the solemn surrender of the long-sighted three-time watch took place.
In August 2016, the challenging project was launched to develop a Hanhart watch in collaboration with stakeholders from one of Germany's largest watchfores, the Watchlounge. The challenge was, in particular, to create a watch that does not differ from the Hanhart identity, but which is nevertheless an independent model for the forum members. The members of the Watchlounge, a German-speaking community for fans and collectors of high-quality watches, have proved themselves to be very critical and innovative co-designers.
In the concept of the special model, the very critical, but still valuable feedback from the Watchlounge users has been incorporated. What first appeared as a challenge by lively and controversial discussions finally turned out to be a successful and very special community project.
The model for the watch was the Hanhart Bundeswehrchronograph (Hanhart 417 ES Flyback), which was introduced in the 50s. The Hanhart Watchlounge Edition is a very long time again a wristwatch that Hanhart produces with the historical logo. The gray coated housing and the luminescent coating on digits, hands and indexes in Light Old Radium also represent absolute novelties in the watch world of the Hanhart brand.
The Hanhart Watchlounge Edition was limited to 61 pieces and only made accessible to the circle of the Watchlounge. It is a three-time watch at the price of 980 euros.
Technical data
Factory
Automatic movement (Sellita SW 200); 28,800 A / h, 4 Hz, 26 stones; Gear reserve 38 hours; Diameter 25.6 mm, height 4.6 mm
Automatic movement (Sellita SW 200); 28,800 A / h, 4 Hz, 26 stones; Gear reserve 38 hours; Diameter 25.6 mm, height 4.6 mm
Housing
stainless steel with gray PVD coating; Round bezel with red index point made of ceramic; Slightly domed sapphire glass, anti-reflective coating on the inside; 2 screwed case bottoms: once completely made of stainless steel, once with sapphire glass; Engraving with limit number; Scaled Hanhart rotor; Diameter 42 mm, height 12 mm; Waterproof to 10 ATM; Lug-to-Lug about 50 mm
stainless steel with gray PVD coating; Round bezel with red index point made of ceramic; Slightly domed sapphire glass, anti-reflective coating on the inside; 2 screwed case bottoms: once completely made of stainless steel, once with sapphire glass; Engraving with limit number; Scaled Hanhart rotor; Diameter 42 mm, height 12 mm; Waterproof to 10 ATM; Lug-to-Lug about 50 mm
Dial
Black with Super-LumiNova®-coated luminizing digits and hands (Light Old Radium); Historical Hanhart logo
Black with Super-LumiNova®-coated luminizing digits and hands (Light Old Radium); Historical Hanhart logo
Bracelet
Brown calfskin with stainless steel pin buckle; Joint width 22 mm
Brown calfskin with stainless steel pin buckle; Joint width 22 mm
More information about the clock can be found here: http://watchlounge.hanhart.com/
mehr sehen Replica Rolex Cellini und replica uhren
没有评论:
发表评论